#include <REGX51.H> #include "INTRINS.H" #define uchar unsigned char #de...
#include <REGX51.H> #define uchar unsigned char uchar code table[]={ ...
數碼管顯示按鍵次數 通過按下按鍵在數碼管上顯示按下的次數,進行1-10次的計數泳挥,當按下第十次的時候,歸零至朗。 一屉符,結構圖 二,程序 #includ...
電路板 AT89C51 程序 #include <REGX51.H> #define uchar unsigned char #define u...
1電路圖 2程序 #include <REGX51.H> #define uint unsigned int #define uchar uns...
電路圖 程序圖 #include <REGX51.H> #define uint unsigned int #define uchar unsi...
電路圖 流程圖 程序 return(0); else { delay(10); if(P1==0x0f) ...
圖片 1唆香、程序 #include <REGX51.H> #define uint unsigned int #define uchar unsi...
電路圖 2吨艇、程序 #include <REGX51.H> #define uint unsigned int #define uchar uns...