TIM截圖20181113143827.jpg
基礎配置
R1接口配置
[R1]interface GigabitEthernet 0/0/1
[R1-GigabitEthernet0/0/1]ip address 192.168.100.1 24
R2接口配置
[R2]interface GigabitEthernet 0/0/1
[R2-GigabitEthernet0/0/1]ip address 192.168.100.2 24
測試網(wǎng)絡是否通暢
[R2]ping 192.168.100.1
PING 192.168.100.1: 56 data bytes, press CTRL_C to break
Reply from 192.168.100.1: bytes=56 Sequence=1 ttl=255 time=90 ms
Reply from 192.168.100.1: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 192.168.100.1: bytes=56 Sequence=3 ttl=255 time=20 ms
Reply from 192.168.100.1: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.100.1: bytes=56 Sequence=5 ttl=255 time=10 ms
--- 192.168.100.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/32/90 ms
在R1開啟ftp服務
開啟ftp挽放，并設置ftp默認家目錄
[R1]ftp server enable
Info: Succeeded in starting the FTP server
[R1]qu
<R1>dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 drw- - Nov 13 2018 06:15:19 dhcp
1 -rw- 121,802 May 26 2014 09:20:58 portalpage.zip
2 -rw- 2,263 Nov 13 2018 06:15:14 statemach.efs
3 -rw- 828,482 May 26 2014 09:20:58 sslvpn.zip
1,090,732 KB total (784,464 KB free)
<R1>system-view
Enter system view, return user view with Ctrl+Z.
[R1]set default ftp-directory flash:/
設置ftp用戶
通過在AAA中設置用戶名和密碼纱意，授權FTP合法用戶連接到FTP服務器比搭。這樣幌陕，非法用戶就無法連接FTP服務器亮航，降低了安全風險诗茎。
[R1]aaa
[R1-aaa]local-user panjunbai password cipher 123456
[R1-aaa]local-user panjunbai service-type ftp
[R1-aaa]local-user panjunbai privilege level 15
[R1-aaa]local-user panjunbai ftp-directory flash:
[R1-aaa]qu
[R1]display ftp-server
FTP server is running
Max user number 5
User count 0
Timeout value(in minute) 30
Listening port 21
Acl number 0
FTP server's source address 0.0.0.0
在R2連接R1的FTP服務器
<R2>ftp 192.168.100.1
Trying 192.168.100.1 ...
Press CTRL+K to abort
Connected to 192.168.100.1.
220 FTP service ready.
User(192.168.100.1:(none)):panjunbai
331 Password required for panjunbai.
Enter password:
230 User logged in.
[R2-ftp]dir
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Nov 13 06:15 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 2263 Nov 13 06:15 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 sslvpn.zip
drwxrwxrwx 1 noone nogroup 0 Nov 13 06:15 .
226 Transfer complete.
FTP: 327 byte(s) received in 0.100 second(s) 3.27Kbyte(s)/sec.
[R2-ftp]binary
200 Type set to I.
上傳文件并重命名
[R2-ftp]put vrpcfg.zip 123.zip
200 Port command okay.
150 Opening ASCII mode data connection for 123.zip.
100%
226 Transfer complete.
FTP: 573 byte(s) sent in 0.170 second(s) 3.37Kbyte(s)/sec.
下載文件
[R2-ftp]get 456.zip
200 Port command okay.
150 Opening ASCII mode data connection for 456.zip.
226 Transfer complete.
FTP: 573 byte(s) received in 0.230 second(s) 2.49Kbyte(s)/sec.
