1.環境

ubuntu18.04+低延遲內核

python3版本 3.6以上

sudo sysctl net.ipv4.conf.all.forwarding=1

sudo iptables-PFORWARD ACCEPT

如果終端不能上網有可能是docker不能上網，

iptables -t nat -L 查看nat轉發規則

iptables -t nat -A POSTROUTING -s 192.168.70.128/26 -j MASQUERADE 增加轉發規則

2.核心網

git clone https://gitlab.eurecom.fr/oai/cn5g/oai-cn5g-fed.git ~/oai-cn5g-fed

cd~/oai-cn5g-fed

git checkout master

拉取核心網容器喊递、docker-compose文件白热、基站配置文件、oai-db使用oai-db2

3. OAI gNB

3.1 OAI gNB pre-requisites

Build UHD from source

sudo apt install -y libboost-all-dev libusb-1.0-0-dev doxygen python3-docutils python3-mako python3-numpy python3-requests python3-ruamel.yaml python3-setuptools cmake build-essential

git clone https://github.com/EttusResearch/uhd.git? ~/uhd

cd ~/uhd

git checkout v4.0.0.0

cd host

mkdir build

cd build

cmake ../

make -j 4

make test# This step is optional

sudo make install

sudo ldconfig

sudo uhd_images_downloader

3.2 Build OAI gNB

# Get openairinterface5g source code

git clone https://gitlab.eurecom.fr/oai/openairinterface5g.git ~/openairinterface5gcd~/openairinterface5g

git checkout develop # Install dependencies in Ubuntu 20.04

cd~/openairinterface5g

source oaienv

cd cmake_targets

./build_oai -I # Build OAI gNB

cd~/openairinterface5g

source oaienv

cd cmake_targets

./build_oai -w USRP --nrUE --gNB --build-lib all -c

4. Run OAI CN5G and OAI gNB with USRP B210

4.1 Run OAI CN5G

cd~/oai-cn5g-fed/docker-composepython3 core-network.py--typestart-basic--fqdnyes--scenario1

4.2 Run OAI gNB

cd~/openairinterface5gsource oaienvcd cmake_targets/ran_build/buildsudo./nr-softmodem-O../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf--sa-E--continuous-tx

5. Testing with Quectel RM500Q

5.1 Setup Quectel

WithPuTTY, send the following AT commands to the module using a serial interface (ex: COM2) at 115200 bps:

# MUST be sent at least once everytime there is a firmware upgrade!AT+QMBNCFG="Select","ROW_Commercial"AT+QMBNCFG="AutoSel",0AT+CFUN=1,1AT+CGDCONT=1AT+CGDCONT=2AT+CGDCONT=3AT+CGDCONT=1,"IP","oai"# Activate PDP context, retrieve IP address and test with pingAT+CGACT=1,1AT+CGPADDR=1AT+QPING=1,"openairinterface.org"

5.2 Ping test

UE host

ping 192.168.70.135-n1000-S12.1.1.2

CN5G host

dockerexec-itoai-ext-dn ping 12.1.1.2

5.3 Downlink iPerf test

UE host

Download iPerf for Microsoft Windows fromhere.

Extract to Desktop and run with Command Prompt:

cd C:\Users\User\Desktop\iPerf\iperf-2.0.9-win64\iperf-2.0.9-win64

iperf -s -u -i 1 -p 5002 -B 12.1.1.2

CN5G host

docker exec-it oai-ext-dn iperf -u -t 86400 -i 1 -fk -B 192.168.70.135 -p 5002 -b 125M -c 12.1.1.2