參考教程
https://blog.csdn.net/weixin_43473435/article/details/90901580
安裝驅動
（1）安裝依賴包
yum -y update
報錯
Cannot find a valid baseurl for repo: base/7/x86_64
需要聯網（方法二可以）
方法一、
1、打開 vi /etc/sysconfig/network-scripts/ifcfg-eth0（每個機子都可能不一樣傍妒，但格式會是“ifcfg-eth數字”），把ONBOOT=no拒迅，改為ONBOOT=yes
2、重啟網絡：service network restart
方法二、
1璧微、打開 vi /etc/resolv.conf作箍，增加 nameserver 8.8.8.8
2、重啟網絡: service network restart
Complete!
（2）依次更新
yum -y install kernel-devel
yum -y install epel-release
yum -y install dkms
yum -y install gcc-c++
（3）檢查顯卡驅動和型號并安裝
a 先添加ELPepo源（聯網問題）
# rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
# rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-2.el7.elrepo.noarch.rpm
b NVIDIA驅動檢測 （430.40）
yum install nvidia-detect
nvidia-detect -v
Probing for supported NVIDIA devices...
[102b:0534] Matrox Electronics Systems Ltd. G200eR2
[10de:1b06] NVIDIA Corporation GP102 [GeForce GTX 1080 Ti]
This device requires the current 430.40 NVIDIA driver kmod-nvidia
[10de:1b06] NVIDIA Corporation GP102 [GeForce GTX 1080 Ti]
This device requires the current 430.40 NVIDIA driver kmod-nvidia
c NVIDIA驅動下載
mkdir /downloads
cd /downloads
wget -r -np -nd https://us.download.nvidia.com/XFree86/Linux-x86_64/430.40/NVIDIA-Linux-x86_64-430.40.run
d nouveau驅動沖突
lsmod | grep nouveau
vim /etc/default/grub
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb rd.driver.blacklist=nouveau nouveau.modeset=0 quiet"
GRUB_DISABLE_RECOVERY="true"
grub2-mkconfig -o /boot/grub2/grub.cfg
# vim /etc/modprobe.d/blacklist.conf
# mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img
# dracut /boot/initramfs-$(uname -r).img $(uname -r)
reboot
# lsmod | grep nouveau
e 安裝顯卡驅動
# cd /downloads
# chmod +x NVIDIA-Linux-x86_64-430.40.run (以實際包名為準) 驗證：通過ls 命令查看前硫，包名高亮顯示即可
# sh NVIDIA-Linux-x86_64-430.40.run
成功胞得！
安裝cuda9.0
直接復制安裝包，沒有問題～
安裝cudnn7.3
tar -xvf cudnn-9.0-linux-x64-v7.3.0.29.tar?
安裝python3.7.2
安裝相關包开瞭，加上一條
yum install libffi-devel -y
wget https://www.python.org/ftp/python/3.6.8/Python-3.6.8.tgz
刪除軟鏈
rm -rf /usr/bin/python3
ln -s /usr/local/python3/bin/python3 /usr/bin/python
ln -s /usr/local/python3/bin/pip3 /usr/bin/pip
意思是把打python跳出python3懒震，打pip跳出pip3
yum會報錯罩息，進去第一行改成python2.7
安裝anaconda3?
參考教程
https://blog.csdn.net/jh0218/article/details/85097061
改環境變量改出問題了嗤详，vi，ls這些命令都不能用了瓷炮，怎么辦
https://blog.csdn.net/xupeng874395012/article/details/65443810
