Three-dimensional printer is made up by a baseplate, a plastic rod, a print head, a temperature controller, a large tank and compressor,and a computer.
先簡單概述下3D打印機的組成部分.還不夠完整.
修改:Three-dimensional printer is made up of ?a computer , a baseplate, a print head and nozzle, a plastic rod, a thermocouple, a temperature controller,and a large tank and compressor.
When the printer was started, it is operated from the computer. The model is printed on the baseplate that moves in the horizontal directions, while the print head and nozzle move in the vertical direction. The raw meterial comes from the plastic rod which is using compressed air from the large tank and compressor and melted by the print head which is regulated by electrical heat sensor connected to a temperature controller. Each time it builds up one layer and again until the plastic is dry. And through repatedly printing over the same area from the bottom upward, a 3D is done.
敘述打印機打印模型的完整過程页响，此為主線创译，副線則要包括打印機硬件再現(xiàn).
修改:The whole printing process is operated from the most important component-computer and it knows which things you want to print. After we give order to the computer, the printer is exactly started. With thermocouple and temperature controller set, the large cylinder tank and compressor deliver the compressed air into the plastic rod to push the raw meterial-ABS plastic to the printer head.For ABS plastic can be sanded smooth or painted and is easy-melted inside the printer but hard-melted outside, it is the best choice for 3D printers.The body connected the printer head is installed on the railway which consists of two robs in order to move regularly.And the nozzle goes through the hole digged on the printer's body.The printer head and nozzle move in the vertical direction to build up the model on the baseplate one layer at a time荠锭，from the bottom upward, by repeatedly printing over the same area,and a model is done蜜暑！
圖給的是很早以前的打印機，寫著寫著發(fā)現(xiàn)自己的思路是跟著視頻里的走返十。妥泉。。
