################### Filebeat Configuration Example #########################

############################# Filebeat ######################################

filebeat:

# List of prospectors to fetch data.

prospectors:

# Each - is a prospector. Below are the prospector specific configurations

-

# Paths that should be crawled and fetched. Glob based paths.

# To fetch all ".log" files from a specific level of subdirectories

# /var/log/*/*.log can be used.

# For each file found under this path, a harvester is started.

# Make sure not file is defined twice as this can lead to unexpected behaviour.

# 指定要監控的日志捆憎，可以指定具體得文件或者目錄

paths:

- /var/log/*.log? （這是默認的）（自行可以修改）(比如我放在/home/hadoop/app.log里）

#- c:\programdata\elasticsearch\logs\*

# Configure the file encoding for reading files with international characters

# following the W3C recommendation for HTML5 (http://www.w3.org/TR/encoding).

# Some sample encodings:

#? plain, utf-8, utf-16be-bom, utf-16be, utf-16le, big5, gb18030, gbk,

#? ? hz-gb-2312, euc-kr, euc-jp, iso-2022-jp, shift-jis, ...

# 指定被監控的文件的編碼類型铃芦，使用plain和utf-8都是可以處理中文日志的

#encoding: plain

# Type of the files. Based on this the way the file is read is decided.

# The different types cannot be mixed in one prospector

#

# Possible options are:

# * log: Reads every line of the log file (default)

# * stdin: Reads the standard in

# 指定文件的輸入類型log(默認)或者stdin

input_type: log

# Exclude lines. A list of regular expressions to match. It drops the lines that are

# matching any regular expression from the list. The include_lines is called before

# 在輸入中排除符合正則表達式列表的那些行悦污。

# exclude_lines. By default, no lines are dropped.

# exclude_lines: ["^DBG"]

# Include lines. A list of regular expressions to match. It exports the lines that are

# matching any regular expression from the list. The include_lines is called before

# exclude_lines. By default, all the lines are exported.

# 包含輸入中符合正則表達式列表的那些行（默認包含所有行），include_lines執行完畢之后會執行exclude_lines

# include_lines: ["^ERR", "^WARN"]

# Exclude files. A list of regular expressions to match. Filebeat drops the files that

# are matching any regular expression from the list. By default, no files are dropped.

# 忽略掉符合正則表達式列表的文件

# exclude_files: [".gz$"]

# Optional additional fields. These field can be freely picked

# to add additional information to the crawled log files for filtering

# 向輸出的每一條日志添加額外的信息玄糟，比如“l(fā)evel:debug”，方便后續對日志進行分組統計民镜。

# 默認情況下乍桂，會在輸出信息的fields子目錄下以指定的新增fields建立子目錄，例如fields.level

# 這個得意思就是會在es中多添加一個字段怜俐，格式為 "filelds":{"level":"debug"}

#fields:

#? level: debug

#? review: 1

# Set to true to store the additional fields as top level fields instead

# of under the "fields" sub-dictionary. In case of name conflicts with the

# fields added by Filebeat itself, the custom fields overwrite the default

# fields.

# 如果該選項設置為true身堡，則新增fields成為頂級目錄，而不是將其放在fields目錄下拍鲤。

# 自定義的field會覆蓋filebeat默認的field

# 如果設置為true贴谎，則在es中新增的字段格式為："level":"debug"

#fields_under_root: false

# Ignore files which were modified more then the defined timespan in the past.

# In case all files on your system must be read you can set this value very large.

# Time strings like 2h (2 hours), 5m (5 minutes) can be used.

# 可以指定Filebeat忽略指定時間段以外修改的日志內容，比如2h（兩個小時）或者5m(5分鐘)季稳。

#ignore_older: 0

# Close older closes the file handler for which were not modified

# for longer then close_older

# Time strings like 2h (2 hours), 5m (5 minutes) can be used.

# 如果一個文件在某個時間段內沒有發生過更新擅这，則關閉監控的文件handle。默認1h

#close_older: 1h

# Type to be published in the 'type' field. For Elasticsearch output,

# the type defines the document type these entries should be stored

# in. Default: log

# 設定Elasticsearch輸出時的document的type字段 可以用來給日志進行分類绞幌。Default: log

#document_type: log

# Scan frequency in seconds.

# How often these files should be checked for changes. In case it is set

# to 0s, it is done as often as possible. Default: 10s

# Filebeat以多快的頻率去prospector指定的目錄下面檢測文件更新（比如是否有新增文件）

# 如果設置為0s蕾哟，則Filebeat會盡可能快地感知更新（占用的CPU會變高）。默認是10s

#scan_frequency: 10s

# Defines the buffer size every harvester uses when fetching the file

# 每個harvester監控文件時，使用的buffer的大小

#harvester_buffer_size: 16384

# Maximum number of bytes a single log event can have

# All bytes after max_bytes are discarded and not sent. The default is 10MB.

# This is especially useful for multiline log messages which can get large.

# 日志文件中增加一行算一個日志事件谭确，max_bytes限制在一次日志事件中最多上傳的字節數帘营，多出的字節會被丟棄

#max_bytes: 10485760

# Mutiline can be used for log messages spanning multiple lines. This is common

# for Java Stack Traces or C-Line Continuation

# 適用于日志中每一條日志占據多行的情況，比如各種語言的報錯信息調用棧

#multiline:

# The regexp Pattern that has to be matched. The example pattern matches all lines starting with [

# 多行日志開始的那一行匹配的pattern

#pattern: ^\[

# Defines if the pattern set under pattern should be negated or not. Default is false.

# 是否需要對pattern條件轉置使用逐哈，不翻轉設為true芬迄，反轉設置為false。? 【建議設置為true】

#negate: false

# Match can be set to "after" or "before". It is used to define if lines should be append to a pattern

# that was (not) matched before or after or as long as a pattern is not matched based on negate.

# Note: After is the equivalent to previous and before is the equivalent to to next in Logstash

# 匹配pattern后昂秃，與前面（before）還是后面（after）的內容合并為一條日志

#match: after

# The maximum number of lines that are combined to one event.

# In case there are more the max_lines the additional lines are discarded.

# Default is 500

# 合并的最多行數（包含匹配pattern的那一行）

#max_lines: 500

# After the defined timeout, an multiline event is sent even if no new pattern was found to start a new event

# Default is 5s.

# 到了timeout之后禀梳，即使沒有匹配一個新的pattern（發生一個新的事件），也把已經匹配的日志事件發送出去

#timeout: 5s

# Setting tail_files to true means filebeat starts readding new files at the end

# instead of the beginning. If this is used in combination with log rotation

# this can mean that the first entries of a new file are skipped.

# 如果設置為true肠骆，F(xiàn)ilebeat從文件尾開始監控文件新增內容算途，把新增的每一行文件作為一個事件依次發送，

# 而不是從文件開始處重新發送所有內容

#tail_files: false

# Backoff values define how agressively filebeat crawls new files for updates

# The default values can be used in most cases. Backoff defines how long it is waited

# to check a file again after EOF is reached. Default is 1s which means the file

# is checked every second if new lines were added. This leads to a near real time crawling.

# Every time a new line appears, backoff is reset to the initial value.

# Filebeat檢測到某個文件到了EOF（文件結尾）之后蚀腿，每次等待多久再去檢測文件是否有更新嘴瓤，默認為1s

#backoff: 1s

# Max backoff defines what the maximum backoff time is. After having backed off multiple times

# from checking the files, the waiting time will never exceed max_backoff idenependent of the

# backoff factor. Having it set to 10s means in the worst case a new line can be added to a log

# file after having backed off multiple times, it takes a maximum of 10s to read the new line

# Filebeat檢測到某個文件到了EOF之后，等待檢測文件更新的最大時間莉钙，默認是10秒

#max_backoff: 10s

# The backoff factor defines how fast the algorithm backs off. The bigger the backoff factor,

# the faster the max_backoff value is reached. If this value is set to 1, no backoff will happen.

# The backoff value will be multiplied each time with the backoff_factor until max_backoff is reached

# 定義到達max_backoff的速度廓脆，默認因子是2，到達max_backoff后磁玉，變成每次等待max_backoff那么長的時間才backoff一次停忿，

# 直到文件有更新才會重置為backoff

# 根據現在的默認配置是這樣的，每隔1s檢測一下文件變化蚊伞，如果連續檢測兩次之后文件還沒有變化席赂，下一次檢測間隔時間變?yōu)?0s

#backoff_factor: 2

# This option closes a file, as soon as the file name changes.

# This config option is recommended on windows only. Filebeat keeps the files it's reading open. This can cause

# issues when the file is removed, as the file will not be fully removed until also Filebeat closes

# the reading. Filebeat closes the file handler after ignore_older. During this time no new file with the

# same name can be created. Turning this feature on the other hand can lead to loss of data

# on rotate files. It can happen that after file rotation the beginning of the new

# file is skipped, as the reading starts at the end. We recommend to leave this option on false

# but lower the ignore_older value to release files faster.

# 這個選項關閉一個文件,當文件名稱的變化。#該配置選項建議只在windows

#force_close_files: false

# Additional prospector

#-

# Configuration to use stdin input

#input_type: stdin

# General filebeat configuration options

#

# Event count spool threshold - forces network flush if exceeded

# spooler的大小厚柳，spooler中的事件數量超過這個閾值的時候會清空發送出去（不論是否到達超時時間）

#spool_size: 2048

# Enable async publisher pipeline in filebeat (Experimental!)

# 是否采用異步發送模式（實驗功能）

#publish_async: false

# Defines how often the spooler is flushed. After idle_timeout the spooler is

# Flush even though spool_size is not reached.

# spooler的超時時間氧枣，如果到了超時時間，spooler也會清空發送出去（不論是否到達容量的閾值）

#idle_timeout: 5s

# Name of the registry file. Per default it is put in the current working

# directory. In case the working directory is changed after when running

# filebeat again, indexing starts from the beginning again.

# 記錄filebeat處理日志文件的位置的文件别垮，默認是在啟動的根目錄下

#registry_file: .filebeat

# Full Path to directory with additional prospector configuration files. Each file must end with .yml

# These config files must have the full filebeat config part inside, but only

# the prospector part is processed. All global options like spool_size are ignored.

# The config_dir MUST point to a different directory then where the main filebeat config file is in.

# 如果要在本配置文件中引入其他位置的配置文件便监，可以寫在這里（需要寫完整路徑），但是只處理prospector的部分

#config_dir:

###############################################################################

############################# Libbeat Config ##################################

# Base config file used by all other beats for using libbeat features

############################# Output ##########################################

# Configure what outputs to use when sending the data collected by the beat.

# Multiple outputs may be used.

output:

### Elasticsearch as output

elasticsearch:　　　　　　　　　　　√枷搿（這是默認的烧董，filebeat收集后放到es里）（自行可以修改，比如我有時候想filebeat收集后胧奔，然后到redis逊移，再到es，就可以注銷這行）

# Array of hosts to connect to.

# Scheme and port can be left out and will be set to the default (http and 9200)

# In case you specify and additional path, the scheme is required: http://localhost:9200/path

# IPv6 addresses should always be defined as: https://[2001:db8::1]:9200

hosts: ["localhost:9200"]? ? ? ? （這是默認的龙填，filebeat收集后放到es里）（自行可以修改胳泉，比如我有時候想filebeat收集后拐叉，然后到redis，再到es扇商，就可以注銷這行）

# Optional protocol and basic auth credentials. #protocol: "https" #username: "admin" #password: "s3cr3t" # Number of workers per Elasticsearch host. #worker: 1 # Optional index name. The default is "filebeat" and generates # [filebeat-]YYYY.MM.DD keys. #index: "filebeat" # A template is used to set the mapping in Elasticsearch # By default template loading is disabled and no template is loaded. # These settings can be adjusted to load your own template or overwrite existing ones #template: # Template name. By default the template name is filebeat. #name: "filebeat" # Path to template file #path: "filebeat.template.json" # Overwrite existing template #overwrite: false # Optional HTTP Path #path: "/elasticsearch" # Proxy server url #proxy_url: http://proxy:3128 # The number of times a particular Elasticsearch index operation is attempted. If # the indexing operation doesn't succeed after this many retries, the events are # dropped. The default is 3. #max_retries: 3 # The maximum number of events to bulk in a single Elasticsearch bulk API index request. # The default is 50. #bulk_max_size: 50 # Configure http request timeout before failing an request to Elasticsearch. #timeout: 90 # The number of seconds to wait for new events between two bulk API index requests. # If `bulk_max_size` is reached before this interval expires, addition bulk index # requests are made. #flush_interval: 1 # Boolean that sets if the topology is kept in Elasticsearch. The default is # false. This option makes sense only for Packetbeat. #save_topology: false # The time to live in seconds for the topology information that is stored in # Elasticsearch. The default is 15 seconds. #topology_expire: 15 # tls configuration. By default is off. #tls: # List of root certificates for HTTPS server verifications #certificate_authorities: ["/etc/pki/root/ca.pem"] # Certificate for TLS client authentication #certificate: "/etc/pki/client/cert.pem" # Client Certificate Key #certificate_key: "/etc/pki/client/cert.key" # Controls whether the client verifies server certificates and host name. # If insecure is set to true, all server host names and certificates will be # accepted. In this mode TLS based connections are susceptible to # man-in-the-middle attacks. Use only for testing. #insecure: true # Configure cipher suites to be used for TLS connections #cipher_suites: [] # Configure curve types for ECDHE based cipher suites #curve_types: [] # Configure minimum TLS version allowed for connection to logstash #min_version: 1.0 # Configure maximum TLS version allowed for connection to logstash #max_version: 1.2 ### Logstash as output #logstash: # The Logstash hosts #hosts: ["localhost:5044"] # Number of workers per Logstash host. #worker: 1 # The maximum number of events to bulk into a single batch window. The # default is 2048. #bulk_max_size: 2048 # Set gzip compression level. #compression_level: 3 # Optional load balance the events between the Logstash hosts #loadbalance: true # Optional index name. The default index name depends on the each beat. # For Packetbeat, the default is set to packetbeat, for Topbeat # top topbeat and for Filebeat to filebeat. #index: filebeat # Optional TLS. By default is off. #tls: # List of root certificates for HTTPS server verifications #certificate_authorities: ["/etc/pki/root/ca.pem"] # Certificate for TLS client authentication #certificate: "/etc/pki/client/cert.pem" # Client Certificate Key #certificate_key: "/etc/pki/client/cert.key" # Controls whether the client verifies server certificates and host name. # If insecure is set to true, all server host names and certificates will be # accepted. In this mode TLS based connections are susceptible to # man-in-the-middle attacks. Use only for testing. #insecure: true # Configure cipher suites to be used for TLS connections #cipher_suites: [] # Configure curve types for ECDHE based cipher suites #curve_types: [] ### File as output #file: # Path to the directory where to save the generated files. The option is mandatory. #path: "/tmp/filebeat" # Name of the generated files. The default is `filebeat` and it generates files: `filebeat`, `filebeat.1`, `filebeat.2`, etc. #filename: filebeat # Maximum size in kilobytes of each file. When this size is reached, the files are # rotated. The default value is 10 MB. #rotate_every_kb: 10000 # Maximum number of files under path. When this number of files is reached, the # oldest file is deleted and the rest are shifted from last to first. The default # is 7 files. #number_of_files: 7 ### Console output # console: # Pretty print json event #pretty: false ############################# Shipper ######################################### shipper: # The name of the shipper that publishes the network data. It can be used to group # all the transactions sent by a single shipper in the web interface. # If this options is not defined, the hostname is used. #name: # The tags of the shipper are included in their own field with each # transaction published. Tags make it easy to group servers by different # logical properties. #tags: ["service-X", "web-tier"] # Uncomment the following if you want to ignore transactions created # by the server on which the shipper is installed. This option is useful # to remove duplicates if shippers are installed on multiple servers. #ignore_outgoing: true # How often (in seconds) shippers are publishing their IPs to the topology map. # The default is 10 seconds. #refresh_topology_freq: 10 # Expiration time (in seconds) of the IPs published by a shipper to the topology map. # All the IPs will be deleted afterwards. Note, that the value must be higher than # refresh_topology_freq. The default is 15 seconds. #topology_expire: 15 # Internal queue size for single events in processing pipeline #queue_size: 1000 # Configure local GeoIP database support. # If no paths are not configured geoip is disabled. #geoip: #paths: # - "/usr/share/GeoIP/GeoLiteCity.dat" # - "/usr/local/var/GeoIP/GeoLiteCity.dat" ############################# Logging ######################################### # There are three options for the log ouput: syslog, file, stderr. # Under Windos systems, the log files are per default sent to the file output, # under all other system per default to syslog. # 建議在開發時期開啟日志并把日志調整為debug或者info級別凤瘦，在生產環境下調整為error級別 # 開啟日志 必須設置to_files 屬性為true logging: # Send all logging output to syslog. On Windows default is false, otherwise # default is true. # 配置beats日志。日志可以寫入到syslog也可以是輪滾日志文件案铺。默認是syslog # tail -f /var/log/messages #to_syslog: true # Write all logging output to files. Beats automatically rotate files if rotateeverybytes # limit is reached. # 日志發送到輪滾文件 #to_files: false # To enable logging to files, to_files option has to be set to true # to_files設置為true才可以開啟輪滾日志記錄 files: # The directory where the log files will written to. # 指定日志路徑 #path: /var/log/mybeat # The name of the files where the logs are written to. # 指定日志名稱 #name: mybeat # Configure log file size limit. If limit is reached, log file will be # automatically rotated # 默認文件達到10M就會滾動生成新文件 rotateeverybytes: 10485760 # = 10MB # Number of rotated log files to keep. Oldest files will be deleted first. # 保留日志文件周期蔬芥。 默認 7天。值范圍為2 到 1024 #keepfiles: 7 # Enable debug output for selected components. To enable all selectors use ["*"] # Other available selectors are beat, publish, service # Multiple selectors can be chained. #selectors: [ ] # Sets log level. The default log level is error. # Available log levels are: critical, error, warning, info, debug # 日志級別控汉，默認是error #level: error