- 問題
$nfc-list
nfc-list uses libnfc 1.7.1
No NFC device found.
- 解決方法
sudo mkdir /etc/nfc && sudo mkdir /etc/nfc/devices.d/
sudo vim /etc/nfc/devices.d/pn532_via_uart2usb.conf
添加一下配置
## Typical configuration file for PN532 board (ie. microbuilder.eu / Adafruit) device
name = "Adafruit PN532 board via UART"
connstring = pn532_uart:/dev/ttyUSB0
allow_intrusive_scan = true
log_level = 3
新方法
在kali2016.1中發(fā)現(xiàn)只需對libnfc進行簡單的配置即可解決問題
編輯/etc/nfc/libnfc.conf
# Allow device auto-detection (default: true)
# Note: if this auto-detection is disabled, user has to set manually a device
#因篇幅問題 中間部分配置省略
# Note: if autoscan is enabled, default device will be the first device available in device list.
#device.name = "microBuilder.eu"
#device.connstring = "pn532_uart:/dev/ttyUSB0"
去掉最后兩行的注釋即可，如下棒厘。
# Allow device auto-detection (default: true)
# Note: if this auto-detection is disabled, user has to set manually a device
#因篇幅問題 中間部分配置省略
# Note: if autoscan is enabled, default device will be the first device available in device list.
device.name = "microBuilder.eu"
device.connstring = "pn532_uart:/dev/ttyUSB0"
配置用于指明所用設(shè)備為/dev/ttyUSB0,即libnfc綁定tty設(shè)備债蓝。
