| 領域 | 默認值 | 描述 |
|---|---|---|
| Calculated Low Limit [t/v]（計算低限） | 0.0 | 根據Setpoint High/Low Limit, Valve High/Low Limit和Valve Gain Near High/Low Limit計算內部MV低限椅您。 只有當Advanced選中時才可見妥畏。對于正/反作用控制器： |
| Incremental Value of MV [t/v] （MV增量值） | 0.0 | 下一步控制作用赏半，即當前值的MV偏差（內核輸出參數）哆档。只有選中Advanced時才顯示蔽挠。 |
| Absolute Value of MV [t/v] （MV絕對值） | 0.0 | 下一步MV絕對值（內核輸出參數）。只有選中Advanced時才顯示瓜浸。 |
| Constraint Flag [t/v] （約束標志） | 0.0 | 對于計算MV高/低限的約束行為（0：無約束澳淑；+1：高約束比原；-1：低約束）（內核輸出參數）。只有選中Advanced時才顯示杠巡。 |
| Steady State Reachable Value [t/v] （可到達穩態值） | 0.0 | MVs的預測穩態值（內核輸出參數）量窘。只有選中Advanced時才顯示。 |
| Steady State Constraint Flag [t/v] （穩態約束標簽） | 0.0 | 穩態時（內核輸出參數）的預測約束行為（0：無約束氢拥；+N：高約束蚌铜；-N：低約束）。N值提供了約束活躍的細節嫩海，1~100：CV約束優先級厘线；101：經濟優化；111：混合比約束出革。只有選中Advanced時才顯示造壮。 |
| Actual MV Status [t/v] （MV實際狀態） | INACTIVE | MV（內核輸出參數）實際狀(BAD/ACTIVE/INACTIVE)。只有選中Advanced時才顯示骂束。 |
注：對某些DCS系統耳璧，設定值回讀位號與輸出位號是相同的。
原文：
| Field | Default Value | Description |
|---|---|---|
| Calculated Low Limit [t/v] | 0.0 | Calculated internal MV low limit based on Setpoint High/Low Limit, Valve High/Low Limit and Valve Gain Near High/Low Limit. Visible only when Advanced option is selected. For both direct and reverse acting controllers: where LoLim is computed as per the Valve Gain Near High Limit or Valve Gain Near Low Limit specification above. |
| Incremental Value of MV [t/v] | 0.0 | Next control action, i.e. the MV deviation from current value (Kernel output parameter). Visible only when Advanced option is selected. |
| Absolute Value of MV [t/v] | 0.0 | Next absolute MV value (Kernel output parameter). Visible only when Advanced option is selected. |
| Constraint Flag [t/v] | 0.0 | Constraint activity (0:Not-limited, +1:High-limited, -1:Low-limited) with respect to MV calculated high/low limit (Kernel output parameter). Visible only when Advanced option is selected. |
| Steady State Reachable Value [t/v] | 0.0 | The predicted steady state values of MVs (Kernel output parameter). Visible only when Advanced option is selected. |
| Steady State Constraint Flag [t/v] | 0.0 | The predicted constraint activity (0:Not-limited, +N:High-limited, -N:Low-limited) at steady state (Kernel output parameter). The value of N provides details on what has made constraint active, 1~100:the priority level for the CV constraints, 101: economic optimization, 111:blending ratio constraints. Visible only when Advanced option is selected. |
| Actual MV Status [t/v] | INACTIVE | The actual status (BAD/ACTIVE/INACTIVE) of MV (Kernel output parameter). Visible only when Advanced option is selected. |
NOTE: In some DCS systems, the Setpoint Readback Tag is identical to the Output Tag.
DV詳情
| 名稱 | 默認值 | 描述 |
|---|---|---|
| Alias（別名） | 工作區中DV變量名展箱。 | |
| Description（描述） | DV變量描述（與GMB中的DV描述相聯系） | |
| Measurement Tag [t]（測量位號） | DV測量位號名 | |
| Disconnect Flag [t/v]（斷開標簽） | False | 此標簽(True/False)用于指示該DV的測量值是否應該被前饋干擾抑制所忽略旨枯。 (如果斷開，SMOCPro將對DV使用內部預測) |
| Essential For Control [t/v]（重要控制） | False | 此標簽(True/False)用于指示此DV對與其關聯子控制器持續（ACTIVE）操作是否是必須的混驰。 （見Max Time Invalid 最大無效時間） |
| Max Time Invalid [t/v]（最大無效時間） | 0 | 如果DV測量量處于INACTIVE時計時器將啟動攀隔。如果計時器超過此指定值（s）且DV是重要控制，則DV的子控制器將被設為INACTIVE栖榨。 |
原文：
**DV Details **
| Name | Default Value | Description |
|---|---|---|
| Alias | Name of the DV variable in the workspace. | |
| Description | DV Variable description (linked to the DV description in GMB). | |
| Measurement Tag [t] | Tagname for the DV measurement. | |
| Disconnect Flag [t/v] | False | Flag (True/False) to indicate if the measurement of this DV should be ignored for feed forward disturbance rejection (SMOCPro will use internal prediction for the DV if it is Disconnected). |
| Essential For Control [t/v] | False | Flag (True/False) to indicate if this DV is essential for the continued (ACTIVE) operation of its associated Sub-Controller (see also Max Time Invalid). |
| Max Time Invalid [t/v] | 0 | If the DV measurement is INACTIVE a timer will start. If the timer exceeds this specified value (seconds) and the DV is Essential for Control, then the DVs Sub-Controller will be set INACTIVE. |
2016.6.26
