安裝jellyfin

TurnKey has a LXC CT for Jellyfin

To create a new Proxmox VE Jellyfin Media Server LXC, run the command below in the Proxmox VE Shell.

Copy
  bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/jellyfin.sh)"
? Default Settings: 2GB RAM - 8GB Storage - 2vCPU ?
Jellyfin Media Server Interface: IP:8096

FFmpeg path: /usr/lib/jellyfin-ffmpeg/ffmpegxxxxxxxxxx echo "devices/pci0000:00/0000:00:02.0/sriov_numvfs = 7" > /etc/sysfs.conf

核顯直通

Preparation

Install Build Requirements

apt update && apt install pve-headers-$(uname -r)
apt install git sysfsutils dkms build-* unzip -y

Install Other Drivers / Tools

This allow you to run vainfo, intel_gpu_top for testing and non-free versions of the encoding driver - without this you will not AFAIK be able to encoding with this GPU. This was missed in EVERY guide i saw for this vGPU, so not sure, but i had terrible issues until i did this.

edits the sources list with nano /etc/apt/sources.list

add the following lines:

#non-free firmwares
deb http://deb.debian.org/debian bookworm non-free-firmware

#non-free drivers and components
deb http://deb.debian.org/debian bookworm non-free

and save the file

apt update && apt install intel-media-va-driver-non-free intel-gpu-tools vainfo

This next step copies a driver missing on proxmox installs and will remove the -2 error for this file in dmesg.

wget -r -nd -e robots=no -A '*.bin' --accept-regex '/plain/' https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915/adlp_dmc.bin

cp adlp_dmc.bin /lib/firmware/i915/

Compile and Install the new driver

Clone github project

cd ~
git clone https://github.com/strongtz/i915-sriov-dkms.git

modify dkms.conf

cd i915-sriov-dkms
nano dkms.conf

change these two lines as follows:

PACKAGE_NAME="i915-sriov-dkms"
PACKAGE_VERSION="6.5"

save the file

Compile and Install the Driver

cd ~
mv i915-sriov-dkms/ /usr/src/i915-sriov-dkms-6.5
dkms install --force -m i915-sriov-dkms -v 6.5

and use dkms status to verify the module is now installed

Modify grub

edit the grub fle with nano /etc/default/grub

change this line in the file

GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt i915.enable_guc=3 i915.max_vfs=7"

note: if you have already made modifications to this line in your grub file for other purposes you should also still keep those items

finally run

update-grub
update-initramfs -u

Find PCIe Bus and update sysfs.conf

use lspci | grep VGA t find the bus number

you should see something like this:

root@pve2:~# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-P [Iris Xe Graphics] (rev 04)

take the number on the far left and add to the sysfs.conf as follows - note all the proceeding zeros on the bus path are needed

echo "devices/pci0000:00/0000:00:02.0/sriov_numvfs = 7" > /etc/sysfs.conf