寫在前面：這篇文章暫分四部分來介紹原生二維碼掃描。

蘋果原生二維碼的功能確實很強大，掃描速度快加矛，不需要對項目進行配置习劫、簡單好用......我覺得后一項優勢就已經讓我有足夠的理由拋棄ZBar/ZXing等第三方了——呵呵壕曼，誰配誰知道.....
但是很難在網上無法找到一個既能掃描，又可以生成二維碼圖片，還可以從相冊中讀取二維碼，而且還是蘋果原生代碼的項目届腐。所以，自己動手寫了一個蜂奸。當然中間代碼和思路也多有借鑒犁苏，如有雷同,哈哈......
參考大神：artifeng和張國兵（因?yàn)闆](méi)找到鏈接，這里以名稱代替了先扩所，后面找到會添加上）围详。
核心內容已經展示完畢，如有需要會再次補充祖屏。
時間倉促助赞，如有錯誤敬請指正，共同進步袁勺。

A 相機掃描二維碼

相機掃描雹食，第一項當然是獲得相機設備了，所以模擬器是做不了二維碼掃描的魁兼。
1 device 獲取攝像設備

- (AVCaptureDevice *)device
{
    if (_device == nil) {
        //AVMediaTypeVideo是打開相機
        //AVMediaTypeAudio是打開麥克風
        _device = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo];
    }
    return _device;
}

• 其中需要注意的是
  AVMediaTypeVideo是打開相機
  AVMediaTypeAudio是打開麥克風

2 input 創建輸入流

- (AVCaptureDeviceInput *)input
{
    if (_input == nil) {
        _input = [AVCaptureDeviceInput deviceInputWithDevice:self.device error:nil];
    }
    return _input;
}

• 如果無法獲取設備婉徘，那么也無法獲取輸入流漠嵌，這里可以進行判斷

if (!input) return;

• 或者直接對獲取設備進行判斷

if (self.device == nil) {
        [self showAlertViewWithMessage:@"未檢測到相機"];
        return;
    }

3 output 創建輸出流

- (AVCaptureMetadataOutput *)output
{
    if (_output == nil) {
        _output = [[AVCaptureMetadataOutput alloc]init];
        [_output setMetadataObjectsDelegate:self queue:dispatch_get_main_queue()];
        //限制掃描區域(上下左右)
        [_output setRectOfInterest:[self rectOfInterestByScanViewRect:_imageView.frame]];
    }
    return _output;
}

• output如果不打開就無法輸出掃描得到的信息
• 這里需要設置輸出對象解析數據時感興趣的范圍咐汞。默認值是CGRect(x: 0,y: 0, width: 1,height: 1)。通過對這個值的觀察儒鹿，我們發現傳入的是比例化撕。注意：參照是以橫屏的左上角作為原點，而不是豎屏约炎。掃描區域封裝成方法植阴，可以方便復用。

- (CGRect)rectOfInterestByScanViewRect:(CGRect)rect {
    CGFloat width = CGRectGetWidth(self.view.frame);
    CGFloat height = CGRectGetHeight(self.view.frame);
    
    CGFloat x = (height - CGRectGetHeight(rect)) / 2 / height;
    CGFloat y = (width - CGRectGetWidth(rect)) / 2 / width;
    
    CGFloat w = CGRectGetHeight(rect) / height;
    CGFloat h = CGRectGetWidth(rect) / width;
    
    return CGRectMake(x, y, w, h);
}
  

4 session 初始化鏈接對象

• session是輸入輸出的中間橋梁

- (AVCaptureSession *)session
{
    if (_session == nil) {
        //session
        _session = [[AVCaptureSession alloc]init];
        [_session setSessionPreset:AVCaptureSessionPresetHigh];
        if ([_session canAddInput:self.input]) {
            [_session addInput:self.input];
        }
        if ([_session canAddOutput:self.output]) {
            [_session addOutput:self.output];
        }
    }
    return _session;
}

**5 preview **

- (AVCaptureVideoPreviewLayer *)preview
{
    if (_preview == nil) {
        _preview = [AVCaptureVideoPreviewLayer layerWithSession:self.session];
    }
    return _preview;
}

6 初始化掃描配置

- (void)scanSetup
{
    //1 添加預覽圖層
    self.preview.frame = self.view.bounds;
    self.preview.videoGravity = AVLayerVideoGravityResize;
    [self.view.layer insertSublayer:self.preview atIndex:0];
    
    //2 設置輸出能夠解析的數據類型
    //注意:設置數據類型一定要在輸出對象添加到回話之后才能設置
    [self.output setMetadataObjectTypes:@[AVMetadataObjectTypeEAN13Code, AVMetadataObjectTypeEAN8Code, AVMetadataObjectTypeCode128Code, AVMetadataObjectTypeQRCode]];
    
    //高質量采集率
    [self.session setSessionPreset:AVCaptureSessionPresetHigh];
    
    //3 開始掃描
    [self.session startRunning];
    
}

7 打開/關閉掃描

• 打開掃描

[self.session starRunning];

• 關閉掃描

[self.session stopRunning];

8 代理方法讀取掃描信息

• 其實1-7都是配置工作圾浅，第8才是重點掠手，因?yàn)槿抗ぷ鞫际且@取攝像頭掃描得到的信息。

- (void)captureOutput:(AVCaptureOutput *)captureOutput didOutputMetadataObjects:(NSArray *)metadataObjects fromConnection:(AVCaptureConnection *)connection
{
    if ([metadataObjects count] > 0) {
        AVMetadataMachineReadableCodeObject *metadataObject = [metadataObjects objectAtIndex:0];
        if ([metadataObject isKindOfClass:[AVMetadataMachineReadableCodeObject class]]) {
            NSString *stringValue = [metadataObject stringValue];
            if (stringValue != nil) {
                [self.session stopRunning];
                //掃描結果
                self.scannedResult = stringValue;
                NSLog(@"%@",stringValue);
                [self showAlertViewWithMessage:stringValue];
                
            }
        }
        
    }
}

• 對于掃描結果你可以自己處理狸捕，包括判斷是字符串還是網頁鏈接等等

B 通過輸入文本創建簡單二維碼

• 第一步當然是在輸入框中輸入信息喷鸽。這個自行配置輸入框
• 創建二維碼。步驟中描述的比較清楚灸拍，不再一一列出

    //關閉掃描
    [self stopScan];
    //鍵盤下落
    [self.view endEditing:YES];
    
    //1 實例化二維碼濾鏡
    CIFilter *filter = [CIFilter filterWithName:@"CIQRCodeGenerator"];
    //2 回復濾鏡的默認屬性(因?yàn)闉V鏡有可能保存上一次的屬性)
    [filter setDefaults];
    //3 經字符串轉化為NSData
    NSData *data = [self.textField.text dataUsingEncoding:NSUTF8StringEncoding];
    //4 通過KVC設置濾鏡做祝，傳入data,將來濾鏡就知道要通過傳入的數據生成二維碼
    [filter setValue:data forKey:@"inputMessage"];
    //5 生成二維碼
    CIImage *image = [filter outputImage];
    //補充：CIImage是CoreImage框架中最基本代表圖像的對象砾省，他不僅包含原圖像數據，還包含作用在原圖像上的濾鏡鏈

• 二維碼信息已經得到混槐，這時需要將二維碼信息轉化為image才能夠方便我們觀看和保存编兄。這里有兩種方式將二維碼信息轉化為imageView。一種高清声登、一種模糊狠鸳。一般選擇第一種即可。

//<這樣講CIImage直接轉換成UIImage生成的二維碼比較模糊悯嗓，有點事比較簡單>
    UIImage *image1 = [UIImage imageWithCIImage:image];

self.imageView.image= [self createNonInterpolatedUIImageFormCIImage:image withSize:100.0];
---------這個轉化方法可以直接復用---------
//將得到的文本數據轉化為高清圖片
//由于生成的二維碼是CIImage類型碰煌，如果直接轉換成UIImage，大小不好控制绅作，圖片模糊
//高清方法：CIImage->CGImageRef->UIImage
- (UIImage *)createNonInterpolatedUIImageFormCIImage:(CIImage *)image withSize:(CGFloat) size {
    CGRect extent = CGRectIntegral(image.extent);
    //設置比例
    CGFloat scale = MIN(size/CGRectGetWidth(extent), size/CGRectGetHeight(extent));
    // 創建bitmap（位圖）;
    size_t width = CGRectGetWidth(extent) * scale;
    size_t height = CGRectGetHeight(extent) * scale;
    CGColorSpaceRef cs = CGColorSpaceCreateDeviceGray();
    CGContextRef bitmapRef = CGBitmapContextCreate(nil, width, height, 8, 0, cs, (CGBitmapInfo)kCGImageAlphaNone);
    CIContext *context = [CIContext contextWithOptions:nil];
    CGImageRef bitmapImage = [context createCGImage:image fromRect:extent];
    CGContextSetInterpolationQuality(bitmapRef, kCGInterpolationNone);
    CGContextScaleCTM(bitmapRef, scale, scale);
    CGContextDrawImage(bitmapRef, extent, bitmapImage);
    // 保存bitmap到圖片
    CGImageRef scaledImage = CGBitmapContextCreateImage(bitmapRef);
    CGContextRelease(bitmapRef);
    CGImageRelease(bitmapImage);
    return [UIImage imageWithCGImage:scaledImage];
}

• 將創建的二維碼圖片保存到相冊

- (void)saveImageToPhotoLib
{
    UIImageWriteToSavedPhotosAlbum(self.imageView.image, self, @selector(saveImage:didFinishSavingWithError:contextInfo:), nil);
}
- (void)saveImage:(UIImage *)image didFinishSavingWithError:(NSError *)error contextInfo:(void *)contextInfo
{
    if (error == nil) {
        [self showAlertViewWithTitle:@"保存圖片" withMessage:@"成功"];
    }
    else
    {
        [self showAlertViewWithTitle:@"保存圖片" withMessage:@"失敗"];
    }
}

C 相冊讀取二維碼

• 第一步當然是要先打開相冊了

- (void)chooseButtonClick
{
    if ([UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypePhotoLibrary]) {
        //關閉掃描
        [self stopScan];
        
        //1 彈出系統相冊
        UIImagePickerController *pickVC = [[UIImagePickerController alloc]init];
        //2 設置照片來源
        /**
         UIImagePickerControllerSourceTypePhotoLibrary,相冊
         UIImagePickerControllerSourceTypeCamera,相機
         UIImagePickerControllerSourceTypeSavedPhotosAlbum,照片庫
         */

        pickVC.sourceType = UIImagePickerControllerSourceTypeSavedPhotosAlbum;
        //3 設置代理
        pickVC.delegate = self;
        //4.隨便給他一個轉場動畫
        self.modalTransitionStyle=UIModalTransitionStyleFlipHorizontal;
        [self presentViewController:pickVC animated:YES completion:nil];
    }
    else
    {
        [self showAlertViewWithTitle:@"打開失敗" withMessage:@"相冊打開失敗芦圾。設備不支持訪問相冊，請?jiān)谠O(shè)置->隱私->照片中進行設置俄认！"];
        
    }
    
}

• 從相冊中選取照片并讀取照片上的二維碼信息

- (void)imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary<NSString *,id> *)info
{
    //1 獲取選擇的圖片
    UIImage *image = info[UIImagePickerControllerOriginalImage];
    //初始化一個監聽器
    CIDetector *detector = [CIDetector detectorOfType:CIDetectorTypeQRCode context:nil options:@{CIDetectorAccuracy : CIDetectorAccuracyHigh}];
    [picker dismissViewControllerAnimated:YES completion:^{
        //監測到的結果數組
        NSArray *features = [detector featuresInImage:[CIImage imageWithCGImage:image.CGImage]];
        if (features.count >= 1) {
            //結果對象
            CIQRCodeFeature *feature = [features objectAtIndex:0];
            NSString *scannedResult = feature.messageString;
            [self showAlertViewWithTitle:@"讀取相冊二維碼" withMessage:scannedResult];
        }
        else
        {
            [self showAlertViewWithTitle:@"讀取相冊二維碼" withMessage:@"讀取失敗"];
        }
    }];
}

D 掃描特效&其他設置

• 掃描方式有很多種个少，這里貼出來一種比較簡單的:通過定時器控制View做動畫。大家可以充分使用各種技巧來使得掃描動作更加豐富眯杏。

- (void)addTimer
{
    _timer = [NSTimer scheduledTimerWithTimeInterval:0.008 target:self selector:@selector(timerMethod) userInfo:nil repeats:YES];
}
//控制掃描線上下滾動
- (void)timerMethod
{
    if (upOrDown == NO) {
        num ++;
        _line.frame = CGRectMake(CGRectGetMinX(_imageView.frame)+5, CGRectGetMinY(_imageView.frame)+5+num, CGRectGetWidth(_imageView.frame)-10, 3);
        if (num == (int)(CGRectGetHeight(_imageView.frame)-10)) {
            upOrDown = YES;
        }
    }
    else
    {
        num --;
        _line.frame = CGRectMake(CGRectGetMinX(_imageView.frame)+5, CGRectGetMinY(_imageView.frame)+5+num, CGRectGetWidth(_imageView.frame)-10, 3);
        if (num == 0) {
            upOrDown = NO;
        }
    }
}
//暫定掃描
- (void)stopScan
{
    //彈出提示框后夜焦，關閉掃描
    [self.session stopRunning];
    //彈出alert，關閉定時器
    [_timer setFireDate:[NSDate distantFuture]];
    //隱藏掃描線
    _line.hidden = YES;
}
- (void)starScan
{
    //開始掃描
    [self.session startRunning];
    //打開定時器
    [_timer setFireDate:[NSDate distantPast]];
    //顯示掃描線
    _line.hidden = NO;
}

• 模糊界面的設置

- (void)setOverView {
    CGFloat width = CGRectGetWidth(self.view.frame);
    CGFloat height = CGRectGetHeight(self.view.frame);
    
    CGFloat x = CGRectGetMinX(_imageView.frame);
    CGFloat y = CGRectGetMinY(_imageView.frame);
    CGFloat w = CGRectGetWidth(_imageView.frame);
    CGFloat h = CGRectGetHeight(_imageView.frame);
    
    [self creatView:CGRectMake(0, 0, width, y)];
    [self creatView:CGRectMake(0, y, x, h)];
    [self creatView:CGRectMake(0, y + h, width, height - y - h)];
    [self creatView:CGRectMake(x + w, y, width - x - w, h)];
}

- (void)creatView:(CGRect)rect {
    CGFloat alpha = 0.5;
    UIColor *backColor = [UIColor blueColor];
    UIView *view = [[UIView alloc] initWithFrame:rect];
    view.backgroundColor = backColor;
    view.alpha = alpha;
    [self.view addSubview:view];
}

• 閃光燈當然也不可少了——夜空中最亮的星

- (void)systemLightSwitch:(BOOL)open
{
    AVCaptureDevice *device = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo];
    if ([device hasTorch]) {
        [device lockForConfiguration:nil];
        if (open) {
            [device setTorchMode:AVCaptureTorchModeOn];
        } else {
            [device setTorchMode:AVCaptureTorchModeOff];
        }
        [device unlockForConfiguration];
    }
}

這個當然是通過按鈕控制的了岂贩，可自行添加按鈕茫经，只需要每次記錄點擊時候的BOOL值。

Demo點這里