與Exaopc軟件的關系
AIDA數據生成器與Exaopc有聯系胜宇。它通過Exaopc收集DCS數據并為AIDA創建數據文件迂卢。圖1-2顯示了AIDA / AIDA數據文件生成器/ Exaopc之間的關系。
與其它軟件的關系
參見上圖途凫。
如以下系統配置圖中所述垢夹，Exaopc站應與DCS聯網。Exaopc軟件的安裝和操作應參考各自的手冊（IM 36J06D20-01E和36J02A12-01E）
與Exasmoc在線控制器相同颖榜，通常AIDA數據歸檔工具在Exaopc工作站上運行棚饵。因此煤裙，硬件和軟件要求與Exasmoc相同掩完。Exaopc提供了數據采集接口噪漾。AIDA數據生成器可以根據選項對話框窗口中的定義（按照本手冊中的說明）連接到Exaopc服務器。
AIDA數據生成器創建的數據文件由AIDA軟件用于AIDA模型辨識且蓬，該文件還提供給用于SMOC-PC為Exasmoc在線控制器創建.CON文件欣硼。
C2. AIDA文件工具
AIDA文件工具生成用于AIDA數據分析和模型辨識工具的數據文件。通過Exaopc OPC數據服務器和歷史數據服務器從DCS采集數據恶阴。該工具安裝在文件夾“(Installed drive):￥￥ProgramFiles￥YOKOGAWA￥IA￥iPCS￥Product￥EXA￥Program”诈胜。
從R4.01起，單擊以下模塊冯事。
“(Installed drive):￥￥Program Files￥YOKOGAWA￥IA￥iPCS￥Product￥EXA￥Program￥AIDAFile Gen.exe”
C2.1數據歸檔工具面板
? 項目說明
表C 2-1操作員和工程師輸入/顯示參數
| 條目| 描述 | 操作員模式 | 工程師模式|
| ------------- |:-------------:| -----:|
| Definition File（定義文件） | 顯示所選位號定義文件的路徑焦匈。從右側的瀏覽菜單指定路徑。| R/W | R/W
| Data File（數據文件）| 顯示所選數據文件的路徑昵仅。路徑由右側的瀏覽菜單指定缓熟。| R/W| R/W
| Item ID（條目ID）| 當生成一個新定義的位號時，指定ItemID摔笤。在瀏覽菜單中直接指定或選擇ItemID够滑。 | R/W| R/W
| Browse （瀏覽）| 顯示可用的ItemID。選中的ItemID被添加到右側的網格面板吕世。該功能在連接OPC服務器后可用彰触。| R| R
| Delete (刪除)| 刪除數據網格表上所選的ItemID。| R| R
| Append（附加）| 在上述的ItemID字段上添加指定的ItemID命辖。| R| R
| Data Type(數據類型)| 在定義要生成的新位號條目時况毅，選擇數據類型（歷史趨勢或預測趨勢值）。| R/W | R/W
原文：
Relationship with Exaopc software
AIDA Data Generator has relationship with Exaopc. It collects DCS data via Exaopc and create data file for AIDA. Figure1-2 shows the relationship between AIDA/AIDA data file generator/Exaopc.
Relationship with other software
Refer the above figure.
Exaopc station should be networked with DCS as explained in the following System configuration figures. Exaopc software installation and operation shall be referred from respective manuals (IM 36J06D20-01E and 36J02A12-01E)
Usually AIDA Data Archiving Tool runs on the Exaopc station, same as Exasmoc online controller. Hence the hardware and software requirement are the same as Exasmoc. Exaopc provides the data collection interface. AIDA Data Generator can connect to Exaopc server according to the definition in the option dialog window (as instructed in this manual).
Data file created by AIDA Data Generator is used by AIDA software for AIDA model identification, which also provides the file for use with SMOC-PC for creating .CON file for Exasmoc online controller.
C2. AIDA File Tool
AIDA file tool generates a data file for AIDA data analysis and model identification tool. Data is collected from DCS via Exaopc OPC data server and Historical data server. The tool is installed under the folder “(Installed drive):￥￥Program Files￥YOKOGAWA￥IA￥iPCS￥Product ￥EXA￥Program”.
From R4.01, click the following module.
“(Installed drive):￥￥Program Files￥YOKOGAWA￥IA￥iPCS￥Product￥EXA￥Program￥AIDAFile Gen.exe”
C2.1 Data Archiving Tool Panel
? Description of items
Table C 2-1 Operator and engineer entry/display parameters
| Item | Description | Operator Mode | Engineer Mode|
| ------------- |:-------------:| -----:|
| Definition File| Path of the selected tag definition file is displayed. Path is specified from the browse menu on the right side. | R/W| R/W
| Data File| Path of the selected data file is displayed. Path is specified from the browse menu on the right side. | R/W | R/W
| Item ID | Specify the ItemID when defining a new tag item to be generated. ItemID is directly specified or selected form the browse menu. | R/W| R/W
| Browse | Available itemID is displayed. Selected ItemID is added to the grid panel on the right side. The function is available after OPC server is connected. | R | R
| Delete | Delete the selected ItemID on the Data grid table. | R| R
| Append | Add the specified ItemID on the ItemID field above. | R| R
| Data Type | Select the Data Type when defining a new tag item to be generated, future value or past trend value. | R/W | R/W
2017.2.21
